kicad-irdrop
Works out how much voltage a KiCad circuit board loses between the power supply and the chip, on the real copper, and shows where the loss is.
Our first power check said FirePod’s processor supply was fine; modelling the real copper showed it losing half again more voltage than its budget. kicad-irdrop models every layer and every connection between layers, measures from the point the power supply watches, and points to the narrow spots that need fixing. The full story is in the release post.
On boards we didn’t design
A tool that only works on its author’s board isn’t much use, so the README walks through two open source boards from Antmicro. On their 12-layer DDR4 tester, the one-volt supply to the main chip loses 17.0 thousandths of a volt at 3 amps, through 5.67 milliohms of copper. Halving the grid size changed that by 1.6%, so the answer has settled.

Blue copper carries little current; the greener it gets, the more it carries. The bright spots are where to look first: a narrow neck in a pour, or too few connections between layers.
Checked against another solver
We solved a purpose-built four-layer test board with kicad-irdrop and with padne, an independent open source solver that works the problem out a different way. With a narrow track carrying the loss the two agreed within half a percent; with the vias and pour carrying it, within about two and a half percent. Both put the highest current at the corner of the notch.

The test board, the scripts and the steps to repeat the comparison are in the repository’s docs/crosscheck folder, along with a validation report covering the unit tests and both Antmicro boards.
Get started
# Run it with the Python that ships with KiCad (it provides pcbnew). On macOS:
PY="/Applications/KiCad/KiCad.app/Contents/Frameworks/Python.framework/Versions/Current/bin/python3"
"$PY" -m pip install git+https://github.com/firedanceio/kicad-irdrop
"$PY" -m kicad_irdrop board.kicad_pcb --rail VDD_CORE:L3:3:U1 Full instructions are in the README on GitHub.
Read the announcement: kicad-irdrop: how much voltage does a circuit board lose?.